Agrawal, B.B. and A. S. Mathur, 2011. New Ironmaking Processes:Relevance to India. Available
http://www.iimdelhi.com/upload_events/01NewIronmakingProcessRelevanceIndia_RDCIS.pdf
American Iron and Steel Institute (AISI). 2012. Recycling of Waste Oxides in Steelmaking Furnaces. Steel
Works – The online resource for steel. Available at:
American Iron and Steel Institute (AISI). 2010. Technology Roadmap Research Program for the Steel
Industry. Available at
American Iron and Steel Institute (AISI).2006a. Technical Feasibility Study of Steelmaking by Molten
Oxide Electrolysis. (2006 TR program book, page 24-25) Available at
American Iron and Steel Institute (AISI).2006b. “Suspension Hydrogen Reduction of Iron Oxide
Concentrate.” (2006 TR program book, page 20-21) Available at
American Iron and Steel Institute (AISI). 2006c. “Integrating Steel Production with Mineral
Sequestration.” (2006 TR program book, page 26-27) Available at
American Iron and Steel Institute (AISI).2002. “Evaluation of Sustainable Steelmaking Using Biomass
and Waste Oxides.” Brochure. (2002 TR program book, page 35-36) Available at
Asia Pacific Partnership on Clean Development and Climate (APP). 2010. The State–of-the-Art Clean
Technologies (SOACT) for Steelmaking Handbook. (2nd Edition). Available at
Asmet. 2011. “New Pig Iron Process ‘Tecnored Technology’ Tested by Vale.” September 27. Available at
Arvedi, G., F. Mazzolari, A. Bianchi, G. Holleis, J. Siegl, and A. Angerbauer. 8. “The Arvedi endless
strip production line (ESP) from liquid steel to hot-rolled coil in seven minutes.” La Revue de
Métallurgie-CIT, July/August, pp. 398-407.
Bao, W., H. Li,Y. Zhang. 2010. “Selective Leaching of Steelmaking Slag for Indirect CO2 Mineral
Sequestration.” Ind. Eng. Chem. Res. 49: 2055–2063.
Barati, M., S. Esfahani, T.A. Utigard. 2011. “Energy recovery from high temperature slags.” Energy.
Volume 36, Issue 9, September, pp, 5440–5449.
Bellevrat, E., P. Menanteau. 2008. “Introducing carbon constraint in the steel sector: ULCOS scenarios
and economic modeling.” Proceedings of the 4th Ulcos seminar, 1-2 October. Available at
Bergman, L., M. Larsson. 2008. “HSC Simulations of coal based DR in ULCORED.” Proceedings of the
4th Ulcos seminar, 1-2 October.
BFI (VDEh-Betriebsforschungsinstitut/Institute for Applied Research). 2012. Steel temperature
measurement in electric steel plants (EAF/LF). Available at
BFI. 2009/2010. Tätigkeitsbericht/Activity Report 2009/2010. Von der Idee zur betrieblichen Lösung/
From the idea to the industrial solution. Düsseldorf, Germany. Available at
Bisio, G. 1997. “Energy recovery from molten slag and exploitation of the recovered energy.” Energy.
Volume 22, Issue 5, May, pp. 501–509.
BCS, Incorporated. 2005. “Advanced Melting Technologies: Energy Saving Concepts and Opportunities
for the Metal Casting Industry.” Available at
Birat, J.P., 2010. “Steel sectoral report - Contribution to the UNIDO roadmap on CCS1 - fifth draft.”
Available at
Birat, J.P., J. Borlée, B. Korthas, J. van der Stel, K. Meijer, C. Günther, M. Halin, T. Bürgler, H.
Lavelaine, C. Treadgold, I. Millar, D. Sert, T. Torp, F. Patisson, B. Paya, E. Burstrom. 2008.
ULCOS program: a progress report in the Spring of 2008. 3rd International Conference on
Process Development in Iron and Steelmaking. Available at
Birat J.P., F. Hanrot, G. Danloy. 2003. “CO2 Mitigation Technologies in the Steel Industry: a
Benchmarking Study Based on Process Calculations.” Stahl und Eisen, 123 (9), 2003: 69-72.
Birat, J.P., C. Grisvard, J.C. Hubert, B. Gros, J.J. Almon. 2001. “Charging tires in the EAF as a substitute
to carbon.” Journées Sidérurgiques Internationales, Paris, France, 12-13 December.
Borlée, J. 2007. “Low CO2 steels - ULCOS project (Ultra Low CO2 Steelmaking).” Presented in IEA
Deployment workshop, October 9.
Bosoago, A., M. Ondrej, J.E. Oakey. 2009. “CO2 Capture Technologies for Cement Industry”. Energy
Procedia, Vol. 1:133-140.
Brown, C.J., D.R. Olsen. 2006. “Regeneration of Hydrochloric Acid Pickle Liquors by Crystallization.”
Third International Symposium in Iron Control in Hydrometallurgy, Montreal, Canada, October 1-4.
Cement Sustainability Initiative (CSI) and European Cement Research Academy (ECRA). 2009.
Development of State-of-the-Art Techniques in Cement Manufacturing: Trying to Look Ahead
(CSI/ECRA-Technology Papers). Available at
Chu M., X., Yang, F. Shen, J. Yagi, H. Nogami. 2006. “Numerical Simulation of Innovative Operation of
Blast Furnace Based on Multi-Fluid Model.” Journal of Iron and Steel Research, International.
2006, 13(6): 8-15.
Clauzade, C. 2006. End-of-life tires in electric arc furnaces: an industrial success story. Available at
Cotchen, J.K. and M. J. Stercho., 2002. “Continuous Horizontal Sidewall (CHS) scrap charging.”
Cramb, A.W. 2004. “Strip Casting of Steels: Current Developments.” Encyclopedia of Materials: Science
and Technology. New York: Elsevier Ltd, pp. 1-4.
Danieli Corus. No date (n.d.). “The Tecnored Process. A New Route For Producing Low Cost Liquid Iron.”
Available at
Danieli and Tenova. 2011. “HYL Process Description.” Available at
Das, B., S. Prakash, P. S. R. Reddy, S. K. Biswal, B. K. Mohapatra, V. N. Misra. 2002. “Effective
Utilization of Blast Furnace Flue Dust of Integrated Steel Plants.” The European Journal of
Mineral Processing and Environmental Protection. Vol. 2, No. 2: 61-68.
De Beer, J., K. Blok, E. Worrell. 1998a. “Future Technologies for Energy-Efficient Iron and Steelmaking.”
Annual Review of Energy and the Environment. Vol. 23: 123-205;
De Beer, J., K. Blok, E. Worrell. 1998b. “Long-term energy-efficiency improvements in the paper and
board industry.” Energy. 23 (1): 21-42.
De Saro R., A. Weisberg, J. Craparo. 2005a. “In Situ, Real Time Measurement of Aluminum, Steel, and
Glass Melt Chemistries Using Laser Induced Breakdown Spectroscopy.” Energy Research
Company. Conference Paper at the ACEEE Summer Study on Energy Efficiency in Industry.
Available at
De Saro R., A. Weisberg, J. Craparo. 2005b. In Situ, Real Time Measurement of Melt Constituents in the
Aluminum, Glass, and Steel Industries. Final Report. Energy Research Co. Available at
Dez, M. A., R. Alvarez, C. Barriocanal. 2002. “Coal for metallurgical coke production: predictions of
coke quality and future requirements for cokemaking.” International Journal of Coal Geology.
Volume 50, Issues 1–4, May 2002, pp. 389–412.
Doronin, I. E., A. G. Svyazhin. 2011. “Commercial methods of recycling dust from
steelmaking.”Metallurgist, Volume 54, Numbers 9-10 (2011), 673-681, DOI: 10.1007/s11015-
011-9356-z
European Integrated Pollution Prevention and Control Bureau (EIPPCB). 2010. Best Available Techniques
(BAT) Reference Document for Iron and Steel Production Industrial Emissions Directive
2010/75/EU. Available at
European Cement Research Academy GmbH (ECRA). 2009. ECRA CCS Project - Report about Phase II.
Available at
EIPPCB. 2008. Best Available Techniques- Reference Document on the Production of Iron and Steel,
(draft version February 2008), European Commission, Directorate-General JRC, Institute for
Prospective Technology Studies, Seville, Spain.
EIPPCB. 2001. Reference Document on Best Available Techniques for the Production of Iron and Steel.
European Commission.
Energetics, Inc. 2004. Steel Industry- Energy Bandwidth Study. Available at
Farla, J.C.M., E. Worrell, L. Hein, and K. Blok. 1998. Actual Implementation of Energy Conservation
Measures in the Manufacturing Industry 1980-1994. The Netherlands: Utrecht University Dept. of
Science, Technology & Society.
Fruehan, R. J. 2004a. Future Steelmaking Processes: Final Report. United States Department of Energy
Fruehan, R. J. 2004b. Sustainable Steelmaking Using Biomass and Waste Oxides: Final Technical Report.
U.S. DOE, Office of Industrial Technologies (OIT). Available at
Fruehan R.J. and R.J. Matway. 2004. “Optimization of Post Combustion In Steelmaking.” Available at
Gielen, D. 2003. “CO2 removal in the iron and steel industry.” Energy Conversion and Management 44:
1027–1037.
Grandmaison, E.W., D Poirier.J., E. Boyd. 2003. “Development Of An Oxygen-enriched Furnace System
For Reduced CO2 and NOx Emissions For The Steel Industry.” Prepared for U.S. Department of
Energy. Available at:
Grill, W. 2009. “The SIMETALCIS Corex / Finex Process.” Convention on clean, green and sustainable
technologies in iron and steel making.15 – 17 July. Bhubaneswar, India.
Gupta, M., I. Coyle, K. Thambimuthu. 2003. “CO2 Capture Technologies and Opportunities in Canada -
Strawman Document for CO2 capture and Storage (CC&S) Technology Roadmap.” 1st Canadian
CC&S Technology Roadmap Workshop, 18-19 September, Calgary, Alberta, Canada.
Hacala, A., U. Michon. 2009. “Innovative industrial plasma torch for converting biomass into high purity
syngas.” ISPC19 - 2009, Bochum, Germany. Available at www.ispcconference.
org/ispcproc/papers/39.pdf
Halder, S. 2011. “An Experimental Perspective on Praxair’s Hot Oxygen Technology to Enhance
Pulverized Solid Fuel Combustion for Ironmaking Blast Furnaces.” Praxair Inc. Technical Paper.
Available at
Hasanbeigi, A., W. Morrow, J. Sathaye, E. Masanet, T. Xu. 2012. Assessment of Energy Efficiency
Improvement and CO2 Emission Reduction Potentials in the Iron and steel Industry in China.
Report. Berkeley, CA: Lawrence Berkeley National Laboratory Report LBNL- LBNL-5535E.
Indian Centre for Plastic in the Environment (ICPE). 2006. Management of plastics, polymer wastes and
Bio-polymers and impact of plastic on the eco-system.
Institute of Materials Processing (IMP)/Michigan Technological University (MTU). 2006. Verification Of
Steelmaking Slag Iron Content. Final technical progress report. Available at
INTEG process group, Inc. 2004. “Hot Strip Mill Model.” Available at
International Energy Agency (IEA). 2010. “The Energy Technology Systems Analysis Program (ETSAP)-
Technology.asp
IEA. 2007. Tracking Industrial Energy Efficiency and CO2 Emissions. Available at:
IEA/ United Nations Industrial Development Organization (UNIDO). 2011. “Technology Roadmaps:
Carbon Capture and Storage in Industrial Applications.” Available at
Japan Iron and Steel Federation (JISF). 2012a. Technologies to support COURSE 50. Available at
JISF. 2012b. COURSE 50 - Technologies to reduce CO2 emissions. Available at
JFE Engineering. 2004. “Ecologically-Friendly and Economical Arc Furnace ‘ECOARC.’” JFE Technical
Joulazadeh, M. H. 2008. “Using Scrap Tires in EAFs as a Substitute for Carbon.” International Journal of
ISSI, Vol.5, No. 1, pp. 36-40.
JP Steel Plantech Co. 2012. “ECOARC.” Available at
JP Steel Plantech Co. 2005. “Waste Plastics Injection System for BF.” Available at
Júniora, J.H.N., M.A. Contruccib, J.C D’Abreuc.
2005. “Tecnored Process - High Potential in Using Different Kinds of Solid Fuels.” Materials
Research, Vol. 8, No. 4, pp. 447-451. Available at
Kazuya, Y., T. Hirokazu, T. Tatsuhito. 2006. “New Applications of Iron and Steelmaking Slag
Contributing to a Recycling-oriented Society.” JFE Technical report. No. 8. October..
Kempgen, J., J. Schlüter, U. Falkenreck, W. Weischedel. 2008. “New scrap-based steelmaking process
predominantly using primary energy.” Millenium Steel 2008. Available at www.millenniumsteel.
com/articles/pdf/2008/pp96-98%20MS08.pdf
Knop, K., M. Hallin, E. Burström. 2008. “ULCORED SP 12- Concept for minimized CO2 emission.”
Proceedings of the 4th Ulcos seminar, 1-2 October.
König, U., J. Hållstedt, J. Noreland, K. Vallo, L. Gobbo, T. Füllmann, K. Macchiarola, J. Nieminen. 2010.
“Using X-ray diffraction.” Nordic Steel and Mining Review.
Kono, Y., Y. Iguchi, M. Shimizu. 2000. “The Basis and Application for Carbon Reduction of Iron Oxide”,
ISIJ, Tokyo, Japan, 31-36.
Kuramochi, T., A. Ramírez, W. Turkenburg, A. Faaij. 2011. “Techno-economic assessment and
comparison of CO2 capture technologies for industrial processes: preliminary results for the iron
and steel sector.” Energy Procedia 4: 1981–1988.
Lackner, K.S., P. F. Duby, T. Yegulalp, S. Krevor, C. Graves. 2008. Integrating Steel Production with
Mineral Carbon Sequestration. Available at
Leimalm, U., M. Lundgren, L. Sundqvist Ökvist, B. Bjorkman. 2010. “Off-gas Dust in an Experimental
Blast Furnace Part 1: Characterization of Flue Dust, Sludge and Shaft Fines.” ISIJ International,
Vol. 50, No. 11, pp. 1560–1569.
Lockwood G2000. Ironmaking Process Alternatives Screening Study - Volume I: Summary Report.
Lu, W.K., 2008. “The Search for a New Ironmaking Process Towards Sustainable Development.” GCEP
“Industry” Workshop, Stanford University, April 15‐16. Available at
Luiten, E. and K. Blok. 2003. “Stimulating R&D of Industrial Energy-Efficient Technology; the Effect of
Government Invervention on the Development of Strip Casting Technology.” Energy Policy 31,
pp. 1339-1356.
Ma, G.J, H. Tangb, Y. Jin. 2011. “Mineral Sequestration of CO2 Using Basic Oxygen Furnace (BOF)
Steelmaking Slag.” Advanced Materials Research, Vols. 194-196, pp 2140-2144.
Maiolo, J., M. Boutazakhti, C.W. Li, C. Williams. 2007. “Developments towards an Intelligent Electric
Arc Furnace at CMC Texas using Goodfellow EFSOP® Technology.” AISTech, Indianapolis,IN,
May 7-10.
Matsumura, T., Y. Takenaka, M. Shimizu. 1999. “Effect of the carbon content on the reduction and
melting behavior of carbon composite iron ore pellet.” Tetsu-to-Hagane 85: 652-657.
Meng, F., Y. Iguchi, I. Kojima. 2001. “Reduction, carburization and melting behavior of iron ore pellets
containing coal char or graphite on heating.” Tetsu-to-Hagane 87: 585-592.
Mesabi Nugget Delaware, LLC and Mining Resources, LLC.2011. “The Mesabi Nugget Story.” Available
MIDREX Technologies, Inc. 2012. “Direct Reduction- Shaft Furnace and Rotary Hearth Furnace (RHF).”
MIDREX Technologies, Inc. 2011. “MXCOL®: A breakthrough in coal-based direct reduction.”
Nashan, G. 2007. “Strategies to increase the technical and economic efficiency of the blast furnace
ironmaking process by using new advanced cokemaking technologies.” Available at www.cokeoven-
Nippon Steel Corp. No date (n.d.). Dust and Sludge Recycling with the Rotary Hearth Furnace. Available
Oda, H., T. Ibarkai, Y. Abe. 2006. Dust Recycling System by the Rotary Hearth Furnace. Nippon Steel
112
Ooi, T.C., D. Thompson, D. R. Anderson, R. Fisher, T. Fray, M. Zandi. 2011. “The effect of charcoal
combustion on iron-ore sintering performance and emission of persistent organic pollutants.”
Combustion and Flame 158: 979–987.
Outotec, Inc. 2012. “Circored® and Circofer®: Fine Ore Reduction in the Circulating Fluidized Bed.”
Available at
Outotec, Inc. 2007. “Fluidization technology.” Available at
Peaslee K.D., V.L. Richards, D. G.C. Robertson, J. D. Smith. 2006. Development of a Process to
Continuously Melt, Refine and Cast High Qulity Steel. Final Technical Report. Project funded by
the U. S. Department of Energy under Award No. DE-FC36-03ID14279. Available at
Poirier D., E.W. Grandmaison, A.D. Lawrence, M.D. Matovic, E. Boyd. 3. “Oxygen-enriched
Combustion Studies with the Low NOX CGRI Burner.” Combustion Canada 3 Conference –
Vancouver, BC Sept. 22-24, 2003. Available at:
%20Combustion%20Canada%202003.pdf
Rawlins, C.H. 2008. Geological Sequestration of Carbon Dioxide by Hydrous Carbonate Formation in
Steelmaking Slag. PhD dissertation. Missouri University of Science and Technology. Available at
Rebello, W.J., K. H. Kohnken, H. R. Phipps Jr. 1980. “Estimation of Fuel Savings by Recuperation of
Furnace Exhausts to Preheat Combustion Air.” Proceedings from the Second Industrial Energy
Technology Conference, Houston TX, April 13-16,.
Richards, V.L. 2008. Geological Sequestration of CO2 by Hydrous Carbonate Formation With Reclaimed
Slag. AISI/DOE Technology Roadmap Program for the Steel Industry. Available at
Riley, M.F. 2002. Hot Oxygen Injection Into The Blast Furnace. Final Report. AISI/DOE Technology
Roadmap Program. Available at
Rohde W., J. Strunk. 1998. “Comparison of coking behavior of coal blends in the single chamber system
and in conventional high capacity coke ovens.” Fuel and Energy Abstracts, Volume 39, Number 1,
January, pp. 10-10(1)
Shimizu, T., D. Haga, G. Mikami,T. Takahashi, K. Horinouchi. 2010. “Heat recovery from melted blast
furnace slag using fluidized bed.” 61st IEA-FBC Meeting. October 28-29, Salerno, Italy.
MeetingOctober+28-29%2C+2010&u=p
Siemens VAI. 2007. “Competence in Ironmaking.” Available at
Sahajwalla,V., M. Zaharia, M. Rahman, R. Khanna, N. Saha-Chaudhury, P. O'Kane, J. Dicker, C.
Skidmore, D. Knights. 2011. “Recycling Rubber Tyres and Waste Plastics in EAF Steelmaking.”
steel research international, Volume 82, Issue 5, pp. 566–572, May,
Sahajwalla,V., M. Zaharia, S. Kongkarat, R. Khanna, N. Saha-Chaudhury, P. O'Kane. 2010. “Recycling
Plastics as a Resource for Electric Arc Furnace (EAF) Steelmaking: Combustion and Structural
Transformations of Metallurgical Coke and Plastic Blends.” Energy Fuels, 2010, 24 (1): 379–391.
SAIL, 2012. Press Release: SAIL, Kobe Steel seal pact to bring environment-friendly steel making to
Schliephake, H., C. Born, R. Granderath, F. Memoli, J. Simmons. 2011. Heat Recovery for the EAF
of Georgsmarienhütte, Germany. Tenova technical article, Iron & Steel Technology 02/05/2011.
Available at
Shulkosky, R.A., D. L. Rosburg, J. D. Chapman. 2005. “Validation of the Hot Strip Mill Model.”
Siemens, 2011. Press release: Siemense receives third FINEX order from POSCO. Available at
201109998.htm
Solena Group. No date (n.d.). “The Commercial Viability of Plasma Technology- A White Paper.”
Sosinsky, D., P. Campbell., R. Mahapatra, W. Blejde, and F. Fischer. 2008. “The CASTRIP® process –
recent developments at Nucor Steel’s commercial strip casting plant.” Metallurgist 52, pp. 691 -
699.
Stebbing, L. 2005. “Using Scrap Tires as an Alternative Fuel Source.” Available at:
Stelco. 1993. “Present and Future Use of Energy in the Canadian Steel Industry.” Ottawa, Canada:
CANMET.
Tenova Key Technologies Industriebau GmbH. 2009. “Recovery of acid and oxide byproducts
from spent pickling liquor.” Metallurgical Plant and Technology 1: 52–53.
Tenova HYL. 2011. “Press Release May 2011: JSPL Selects Energiron for Four New DR Plants”.
Tenova HYL. 2008. “Improved Technologies for Cost Effective Steelmaking.” Metal Bulletin/MJunction.
Indian Steel 2008 Conference. Mumbai, India. Feb.
Thekdi, A. 2010. Development of Next Generation Heating System For Scale Free Steel Reheating-Final
Travernier, H., C. Grisvard , H.P. Jung, P. Drissen. 2004. Foaming of the slag and recycling of stainless steel
dusts by injection into the electric arc furnace for stainless steels. Final Report. European
Commission. Research Directorate-General, European Commission. Directorate-General Science,
Research and Development. Abstract available at
Ueki, Y., H. Maeda, H. Nakagawa, M. Shimizu. 2001. “Effect of atmospheric gas composition on
reduction of high density carbon composite pellet.” CAMP-ISIJ,14, 82Ultra - low CO2
Steelmaking ( ULCOS ), 2012a. “ULCOWIN: Alkaline Electrolysis.” Available at
ULCOS. 2012c. “ULCORED.” Available at
United Nations Industrial Development Organization (UNIDO). 2010. Carbon Capture and Storage in
Industrial Applications: Technology Synthesis Report. Available at
114
University of New South Wales (UNSW). 2012. Solid State & Elemental Analysis Unit. Available at
U.S. Department of Energy (DOE). 2001. Recycling of Waste Oxides in Steelmaking. Notice of Energy
RD&D Project. Available at:
U.S. Department of Energy (U.S. DOE), Advanced Manufacturing Office (AMO). 2012. “Industries and
Technologies.” Available at
U.S. DOE/ Industrial Technologies Program (ITP). 2011a. Paired Straight Hearth Furnace. Available at
U.S. DOE/ ITP. 2011b. Thermochemical Recuperation for High Temperature Furnaces. Available at
U.S. DOE/ Industrial Technologies Program (ITP). 2010a. IMPACTS: Industrial Technologies Program:
Summary of Program Results for CY 2009. Available at
U.S. DOE/ ITP. 2010b. Energy Technology Solutions: Public-Private Partnerships Transforming Industry.
Available at
U.S. DOE/ ITP. 2007a. Next Generation Heating System for Scale-Free Steel Reheating. Available at
U.S. DOE/ ITP. 2007b. Geological Sequestration of CO2 by Hydrogen. Carbonate Formation with
Reclaimed Slag. Available at
U.S. DOE/ ITP. 2005. Process to Continuously Melt, Refine, and Cast High Quality Steel. Continuous
transfer process could replace current ladle operations. Energy Efficiency and Renewable Energy
Available at
U.S. DOE/ITP. 2005b. NOx Emission Reduction by Oscillating Combustion. Available at:
U.S. DOE/ ITP. 2004. In-Situ, Real-Time Measurement of Melt Constituents. Laser-Induced Breakdown
Spectroscopy (LIBS) Provides Real-Time Analysis of Elemental Constituents to Improve Product
Quality.
easurement.pdf
U.S. DOE/Office of Industrial Technologies (OIT). 2002. Recycling and Reuse of Basic Oxygen
Furnace (BOF)/ Basic Oxygen Process (BOP) Steelmaking Slag. Available at
U.S. DOE/ OIT. 2001a. In-Situ, Real-Time Measurement of Melt Constituents. Steel Project Fact Sheet.
Available at
easurement.pdf
U.S. DOE/OIT. 2001b. NOx Emission Reduction By Oscillating Combustion. Available at:
115
U.S. DOE/OIT. 2001c. Recycling of Waste Oxides in Steelmaking Furnaces. Available at:
U.S. DOE/ OIT. 2000. Energy Saving Regeneration of Hydrochloric Acid Pickling Liquor. Available at
U.S. DOE/OIT. 1999. Development of an O2-Enriched Furnace System For Reduced CO2 and NO2
Emissions. Washington, D.C. 20585. Available at:
U.S. Environmental Protection Agency (U.S. EPA). 2010. Available and Emerging Technologies for
Reducing. Greenhouse Gas Emissions from the Iron and Steel Industry. Available at
U.S. Geological Survey (USGS). 2012. Mineral Commodity Summaries- Iron and Steel. Available at
van Boggelen, J. 2012. “HIsarna, a Low CO2 Ironmaking Process.” Presentation at Cleveland Institution
of Engineers, Middlesbrough, UK. Available at
10%20hisarna/2012%2001%2010%20for%20publication%20v3.pdf
Wagner, J.C. 2004. NOx Emission Reduction By Oscillating Combustion. Final Report. U.S. Department of
Energy Contract No. DE-FC36-96EE41260. Available at:
World Steel Association (worldsteel). 2011. Steel Statistical Yearbook 2011.
worldsteel. No date (n.d.). CO2 Emissions Data Collection – User Guide, Version 6.
Worrell, E., P. Blinde, M. Neelis, E. Blomen, E. Masanet. 2010. Energy Efficiency Improvement and Cost
Saving Opportunities for the U.S. Iron and Steel Industry: An ENERGY STAR Guide for Energy
and Plant Managers. Available at
Worrell, E., J.A. Laitner, M. Ruth,M., and H. Finman. 3, “Productivity Benefits of Industrial Energy
Efficiency Measures.” Energy 11, 28:1081-1098.
Yagi, J.I., H. Nogami, M. Chu. 2003. “Numerical analysis on blast furnace performance by multidimensional
transient simulator based on multi-fluid theory.” Third International Conference on
CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, 10-12 December.
Available at
Yu, J., K. Wang. 2011. “Study on Characteristics of Steel Slag for CO2 Capture.” Energy Fuels 2011, 25:
5483–5492.
Zaharia, M., V. Sahajwalla, B. ChulKim, R. Khanna, N. Saha-Chaudhury, P.
O’Kane, J. Dicker, C. Skidmore, D. Knights. 2009. “Recycling of Rubber Tires in Electric Arc
Furnace Steelmaking: Simultaneous Combustion of Metallurgical Coke and Rubber Tires Blends.”
Energy & Fuels 2009, 23,:2467–2474.Zandi, M., M. Martinez-Pacheco, T. A.T. Fray. 2010.
Biomass for iron ore sintering. Minerals Engineering. Volume 23, Issue 14, November 2010,
Pages 1139–1145
Zhang, X., R. Takahashi, J. Yagi., 1995. “Reaction rates of oxidized iron-scrap briquette with pulverized
coke in nitrogen atmosphere.” Tetsu-to-Hagane 81: 1043-1048.
116